Pattern Revisions LST100 - LST140

LST100 PUPPY PILLOW

  • Page 1, Step 1: "utensil" refers to "pen or chalk".
  • Page 2, Steps 4, 5. and 6: "access" should be "excess".

LST108 CAT NAPPER

  • Page 1 Cutting Instructions, Contrast, If using yardage: Cut (2) 2" by width of fabric for Ties

LST109 DAPHNE

  • Page 5 Figure 33 is supposed to be labeled Figure 35.

LST110 BACKYARD CADDY

  • Removed "Light Interfacing" from Premade Base Label "Base".
  • Back Cover: Lightweight Fusible Woven Interfacing (19" wide) - 1-1/4 yards.
  • Figure C - would only have three strips cut from the parallelogram shape.
  • FUSIBLE WOVEN INTERFACING: add: Cut (4) Pattern Piece Side Panel
  • HEAVY STABILIZER: add: Cut (1) Pattern Piece Handle Stabilizer A

LST114 MAGNOLIA

  • Need 3/4 yard of Interfacing.
  • If your Main or Contrast fabric is less than 27" wide, purchase 3/4 yard.

LST115 LUCKY PENNY WALLET

  • For the lock hack, center the washer either 1-5/8" for a looser fit, or 1-3/8" for a tighter fit wallet.
  • Back Cover: if 25" wide fabric - use [1/3 yard]

LST118 TOWNSEND

  • © 2019 Version
    • Follow all written instructions for sizes
    • Page 1, under PREPARING THE FABRIC: Fuse Interfacing Base pieces to WS of coordinating Exterior and Lining Base pieces.
  • © 2020 Version
    • (Paper Pattern Only) - On page 11, the printed labels for Townsend Lining Train Case Back Panel and Townsend Contrast Train Case Back Panel should read: Cut (1) 10" by 4-1/2"

LST120 LUCI

  • Need 14" of Contrast.

LST121 MYRNA

  • Page 1, under PREPARE THE FABRIC: 1. Center and Fuse interfacing to the WS....

LST125 CONNIE

  • Foam Cutting Instructions: Cut (2) 3" by 20" [2" by 16"] pieces for Zipper Gusset.
  • Mesh Cutting Instructions: Cut (1) 13" by 11" [11" by 9"] pieces for Lining Pocket.
  • Page 5 Make & Attach Mesh Side Pockets. Steps 5-9 are mislabeled. Should be 2-6.
  • Watch our tutorial on YouTube to help make the Gusset if using directional fabric.

LST126 TRIPPER

  • Page 9, under ASSEMBLE BACKPACK, step 5 tip: Try using 3/8" seam allowances for all the lining seams, making the lining slightly smaller.

LST128 GINGER

  • On the premade labels it should say Cut (3) 1-1/2" by 20" pieces of Interfacing for the Strap

LST129 MASON

  • Under cutting instructions on page one. Cut out all paper pattern pieces, found on pages 4-5, along the solid lines

LST131 CHARADE

  • Need of Heavy Weight Stabilizer for Base Support.
  • Label for strap interfacing should say (3) 2" by 20" pieces.

LST132 MOLLY

  • Label says Foam, not Contrast
  • Contrast Cutting Instructions: Cut (4) 1" by 15" pieces. The label was wrong.
  • Label needed for Interfacing
  • Cut (2) 7-1/2" by 4" pieces for Side Top Facing - written directions are correct.
  • © 2024 Pattern Version
    • Piece H should say Cut (4) withing both sets of cutting instructions.

LST133 FERRIS

  • On Either Version
    • Please match up the "A's" on Large size pieve back and tape together for the full pattern pieve before cutting your fabric.
  • © 2020 Version
    • Main Fabric and Fleece Cutting Instructions: LARGE: Cut (1) 10" by 2" piece for Panel B.
    • Added 3/8" to right side of pattern LARGE Panel D on page 8.
    • If you received the Ferris pattern copyrighted 2024, please follow all the instructions and use the pattern pieces in the ©2024 pattern download.
  • © 2024 Version - Cutting Instructions - Lining
    • Cut (1) 6" x 5" [7-3/4" by 5-1/2"] {10" by 7"} for Piece I (Pocket Lining) 15.2cm by 12.7cm [19.7cm by 14cm] {25.4cm by 17.8cm} 

LST133-ES FERRIS

  • © 2025 Version - Instrucciones De Corte - Tela De Forro
    • Cortar  (1) rectángulo de 6" por 5" [7-3/4" por 5-1/2"] {10" por 7"} para la Pieza I (Forro para el bolsillo)   15,2cm por 12,7cm [19,7cm by 14cm] {25,4cm by 17,8cm} 

LST134 SHAW

  • Large Main Fabric Cutting Instructions: Cut (4) 1-1/4" by 2" pieces for Zipper Tabs
  • Page 6, under ASSEMBLE BACKPACK:
    • Step 2: .... Sew together with 3/8" seam allowance
    • Step 4: ... at the top of your bag with 3/8" seam allowance .... increase your seam allowance to 5/8" as you reach ...... decrease your seam allowance back to 3/8" wide.
    • Steps 6 & 7: Sew together with 3/8" seam allowance.

LST136 ANNA

  • Back of cover interfacing listed wrong amount. Corrected to 19" wide by 1-3/4 yard or 42" wide by 7/8 yard.

LST140 LITE CORK CARRY ALONG

  • Page 1 Make & Attach Strap Connector. Step 2: The Stap Connector piece should now measure 3/4" wide and 2" long.