Pattern Revisions LST261 - LST300

LST269 FIFTH AVENUE

  • ©2024 Version
    • 1/26/24 - The instant download instruction file has been updated. If you received an email referencing an update to this pattern, please redownload the files from link in the email, or from your original download link.
    • Page 4: Under PREPARE THE ADJUSTABLE BUCKLE STRAP; Step 5. With the underside out, thread the opposite end of Strap (without slider buckle) through the remaining half of the Side Release Buckle, from the inside to the outside (Figure 30). Thread Strap raw end through the slider buckle (Figure 31).

LST270 JENNY

  • ©2024 Version
    • page 12 - Piece O Top Connector (pattern template)

LST272 HAMILTON

  • Page 10 Cutting Layout - Interfacing should be listed as Main Interfacing 19" by 104" and Lining Interfacing 19" by 94"
  • Back Cover, Mesh listing - if 27" (68.6cm) wide - 2/3 yard (0.61m).

LST273 MISTY

  • ©2023 Version Back Cover & Flap:
    • Does not include metric measurements
    • Under RECOMMENDED FABRICS: Lining revised to include Turtle Tex
    • Under MATERIALS & SUPPLIES:
      • Sew-In Foam or Air Mesh
      • Misty Hardware Kit listing revised to include: (4) 1/2" (12mm) Dome Feet, (1) 1/2" (12mm) Zipper Cord End, (1) Invisible Bar Snap, (3) #5 Rectangle Zipper Pull, (1) Script Handmade Label.
      • Optional: (1) 3/4" (19mm) Invisible Round Snap - STS223 - substitute for bar snap.
      • Optional: (4) 1/2" (12mm) Bag Feet - bucket STS101x* or prism STS334x* - substitute for dome bag feet
      • Optional: (1) Handmade Label - gellatio STS308x*, tiemann STS309x*, sans serif STS214x*, or variety pack STS310x* - substitute for script handmade label
  • ©2023 Version Instructions:
    • Does not include metric measurements
    • Page 1, under CUTTING INSTRUCTIONS: 
      • CONTRAST FABRIC: Cut (1) 11-1/2" by 4-1/2" for Piece J (Base)
      • LINING FABRIC:
        • Cut (1) 11-1/2" by 4" for Piece R (Base)
        • Cut (2) 14" by 15" for Piece S (Interior)
        • Cut (4) 1-1/4" by 1-3/4" for Piece V (Zipper Tabs)
      • FOAM OR AIR MESH: Cut (1) 11-1/2" by 4-1/2" for Piece J (Base)
      • HEAVY STABILIZER: Cut (1) 9-1/2" by 3-3/4" for Piece Y (Base)
    • Page 2, under PREPARE EXTERIOR FRONT:
      • steps 4-6 are reorganized to match video tutorial.
    • Page 2, inder PREPARE STRAPS:
      • step 5 is moved to page 3, under CREATE BUCKLE CONNECTORS, to match video tutorial, following step 4.
    • Page 3, under CREATE BUCKLE CONNECTORS:
      • Step 5: ...Using a zipper foot, topstitch across each Strap Connector about 3/4" from the fold, below hardware, ...
    • Page 3, under MAKE & ATTACH INTERIOR PADDED POCKET:
      • step 1: ...matching the 11" edges, Sew along the matched 11" edges...
      • step 3: ...Topstitch Slip Pocket 1/8" from the side...
      • step 4: Sew together with 1/4" seam allowance.
      • step 5: ...entire piece measures 11" long.
      • step 13: ...Topstitch 1/8" from the side and bottom edges...
    • Page 5, under PREPARE TOP ZIPPER:
      • Tip added, following step 4: Visit our blog, Zippers - 90° Angle Ends, July 25, 2024 for easy, alternative techniques to prepare the open end of the zipper!
    • Page 6, under ASSEMBLE BAG:
      • step 2: ...opposite center mark 1-1/2" from the...
    • Page 7, under PATTERN PIECES: pattern tracing tip added: For Pattern Tracing Tips & Techniques scan the QR code Or visit bit.ly/4kmST1S

LST276 TRAVELER

    • Page 1, under PREPARE & ATTACH PASSPORT HOLDER: Figure 7 - dimension should be 4-3/4"

LST280 FIELDS

  • On Page 2, under ASSEMBLE BAG
    • Step 3: Leave a 4" - 5" opening between darts for turning.
    • Re-numbered 4. Turn Lining RSO.....
    • Re-numbered 5. Turn the bag RSO....

LST283 JESSICA

  • On page 3, Figure 16: should have the WS of the lining showing, not the WS of the main fabric.

LST284 KRISTIN

  • Under Materials & Supplies: Contrast Fabric should be listed as 25" wide.

LST292 MARY

  • Back Cover - The fusible woven interfacing item # should be STIFWI (not STFWI) and the sew-in foam item # should be STISIF (not STSIF).

LST293 BEDFORD FALLS

  • Page 1: Under ASSEMBLE HOUSE: Step 3: ..... against the WS of each Contrast A Piece C ......

LST299 RUTH

  • Page 1: Under TIPS FOR SEWING WITH VINYL: ...... needle size 70/10 ....
  • Page 1: Figure 5: The blue pocket piece should be Wrong SIde of Accent Fabric.
  • Page 2: Under PREPARE ZIPPER CLOSURE, step 5: ....With RSD, position one side.... 
  • Page 3: Under CREATE & ATTACH STRAP CONNECTORS, tip after Step 3: ......  raw edges are stitched in place.
  • Page 5: in Cutting Layout diagram: the tan 'Accent' should be labeled as Contrast