Pattern Revisions LST181 - LST220
LST183 CARLTON
- WEBBING for size MEDIUM: Cut (1) 10" piece for Piece F.
- WEBBING for size LARGE: Cut (1) 12" piece for Piece F.
LST184 HEIDI
- Main Fabric - Cut (1) 1/2" by 1-3/4" for Piece D (Strap Connector).
LST190 MONROE
- Figure 4 has been updated - illustration of pocket should be rotated 180° (red stitching would be at the top, bottom, and right-hand edges of the illustrated pocket piece).
LST192 ANDIE
- Optional: Cut (1) 1/4" by 9-1/4" for Piece E (Connector).
LST193 AVA
- HARDWARE REQUIRED: Ava Hardware Kit (kit includes (1) 1-1/4" belt buckle, (1) 1" screw-together grommet, (2) 1-1/2" rectangle rings, and (2) 1-1/2" slider buckles, (1) O-ring.
- Added "FOLD" note to Pattern Piece N on page 9.
LST194 DEBBY
- Piece D cutting instruction: 4" by 12".
- OR Cut 2" by 12" for heavier and non-fraying fabrics (such as Cork) and then follow only the first sentence of Step 1, on Page 2, under Add a Wrist Strap.
LST195 AURORA
- MATERIALS & SUPPLIES - 1-1/2" wide Webbing - 1-1/2 yards.
LST198 NICHOLAS
- Interfacing - 1-1/2 yard need for large size.
- Cutting Layouts added.
LST203 CROCKETT
- Before beginning your project, we have recommendations and tips when using Faux Waxed Duck Canvas for the Crockett. Use this link for more information.
- Page 2, PREPARE CONNECTORS, Step 2: Piece B should now measure 1" wide.
- Page 3, ASSEMBLE FRONT PLEAT POCKET, Step 5: On WS, top edge of Piece D, mark 3" and.....
- Page 3, under Prepare Zipper Pocket Facing, Step 1: Mark a vertical line 1-1/4" in from the right short end and 3/4" in from the left short end.
- Page 6, Step 2: If your lining zipper is left-hand opening, remember to orient your zipper gusset for left-hand opening. (Opposite the gusset in Figure 43)
LST207 S.T.UFF-INS
- Back Cover, Mesh listing - if 27" wide - 1/2 yard.
